home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.20031118-20041115
/
000156_collector59ca@yahoo.com_Tue Mar 30 09:56:48 2004.msg
< prev
next >
Wrap
Internet Message Format
|
2004-11-14
|
2KB
Path: newsmaster.cc.columbia.edu!iad-feed.news.verio.net!peer1.stngva01.us.to.verio.net!news.verio.net!news.glorb.com!postnews2.google.com!not-for-mail
From: collector59ca@yahoo.com (Klein Bill)
Newsgroups: comp.protocols.kermit.misc
Subject: Trying to connect to a device console via COM 1 (no dialing modem)
Date: 29 Mar 2004 22:40:31 -0800
Organization: http://groups.google.com
Lines: 34
Message-ID: <9c258be2.0403292240.2e00c890@posting.google.com>
NNTP-Posting-Host: 80.74.106.236
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
X-Trace: posting.google.com 1080628831 8945 127.0.0.1 (30 Mar 2004 06:40:31 GMT)
X-Complaints-To: groups-abuse@google.com
NNTP-Posting-Date: Tue, 30 Mar 2004 06:40:31 +0000 (UTC)
Xref: newsmaster.cc.columbia.edu comp.protocols.kermit.misc:14868
Hi all,
I'm trying to connect to the ASCII terminal of a manageable router
device which is directly connected to my serial port COM 1.
I'm using the following Kermit script:
set input echo on
def tsprompt >
set carrier-watch off
set line 1
open port 1
set serial 8n1
set speed 115200
if def tsprompt {
for \%i 1 2 1 {
input 1 \m(tsprompt)
if success break
output \13
}
lineout show config ;command to send
}
When running this script, kermit stays in command mode but I see no
dialog between it and the router even though I've used "set input echo
on".
If I press Alt-x the terminal window is opened and my command is
finally sent (but I remain in terminal mode).
How can I make Kermit show me the interaction in command mode ?
Note: There's nothing to be dialed. I have no modem. I'm serially,
directly connected.
Thanks in advance for any help.